Record velocity with high accuracy.

Each blade anemometer is adjusted individually. Multi-point adjustments are saved in the ALMEMO ® D6 connector.

In practice, measurements using a vane anemometer in air/gas are largely independent of environmental parameters such as pressure, temperature and humidity. The slight density dependence of the measurement can be compensated. The gas density in ALMEMO ® is programmed on the ALMEMO D6 sensor menu ® V7 device.

Rugged design for mobile and fixed measurements.

The ALMEMO ® D6 connector measures the frequency signal of the impeller at high resolution.

1 measurement channel has been programmed (factory) : flow rate v (m/s).